Soda ash: why your tie-dye faded, and how to stop it
By Mike Fowler · September 28, 2026
If you remember one thing about tie-dye chemistry, remember this. Soda ash is what makes the dye permanent. Without it, fiber reactive dye rinses right out, and your bright shirt becomes a pale ghost of itself after one wash.
What it does
Soda ash, sodium carbonate, raises the pH of the fabric so the dye can form its chemical bond with the fiber. It is the same chemical used in the scour, doing its second job as the fixative. Use pure sodium carbonate: grocery-store washing soda can carry additives that cause streaky, uneven results.
Method 1: the Soda Soak
- Warm water1 gallon
- Soda ashabout 1 cup
- Soak time15 to 20 minutes
Soak the fabric, wring it out, then fold and dye. The fabric is already activated, so the dye bonds on contact. This is the most reliable method for beginners.
Method 2: activated dye
Mix about 1 teaspoon of soda ash straight into your dye just before you use it, then apply it to dry or lightly damp folded fabric. No bucket needed. But the clock starts the moment the soda ash goes in, because the high pH begins breaking the dye down. Use the whole batch within 30 to 60 minutes, and mix only what you can use in one go.
Mike uses Method 2 for complex folds: he can fold washed, damp fabric without gloves and get crisp accordion folds.
Safety
Soda ash is alkaline. Wear gloves, because it can dry and irritate skin, keep it away from your eyes, and wear a dust mask when measuring the dry powder.
Every fold, recipe and fix in this article comes from Art of Tie-Dye, Mike Fowler's complete guide to folding, tying and dyeing.