Scouring: the pre-wash that decides everything

By Mike Fowler · September 25, 2026

Scouring: the pre-wash that decides everything

Scouring is just a fancy word for pre-washing your fabric, but it matters enough to understand properly. Factory fabric carries invisible finishes, oils, dirt and optical brighteners, and all of them can block dye or make it land unevenly.

The two ingredients

  • Synthrapolabout 1/4 cup per full machine load
  • Soda ashabout 1 teaspoon per gallon of water
  • Waterhot

Synthrapol is a clear detergent with no optical whiteners or brighteners. It lifts oils and residues. Soda ash helps clean and begins to ready the fabric. A quarter cup of Synthrapol is a little more than a finger's depth in a 16 ounce bottle.

Do new t-shirts need it?

Most brand-new t-shirts were scoured at the factory, so they often need little more than a hot wash. Scouring them yourself guarantees an even result. Never skip it on fabric you are not sure about.

Never use fabric softener

It leaves a coating that fights the dye. If your color came out blotchy, an unscoured finish is the usual suspect.

Every fold, recipe and fix in this article comes from Art of Tie-Dye, Mike Fowler's complete guide to folding, tying and dyeing.

Comments