How to mix Procion MX dye: real measurements

By Mike Fowler · September 26, 2026

How to mix Procion MX dye: real measurements

This is the part the old timers would not give you. Here it is, in real measurements. You will be mixing dye powder into chemical water, not plain water.

The ratio

  • Chemical water2 cup jar
  • Procion MX dye, most colorsabout 2 tablespoons
  • Black4 to 5 tablespoons

Two tablespoons gives a strong, saturated result. Black is greedy: mixed weaker, it comes out a disappointing gray-brown. If you want true black, use the extra powder.

Mixing

Whisk the powder into the chemical water with a bar whisk until there are no specks at all. Put the lid on and shake the jar well. Undissolved powder becomes dark spots on the finished shirt, so take the extra few seconds.

Rules for every color

  • More powder, deeper color. Use less for pastels, hold the line for punchy color, more for black.
  • Dissolve fully. Specks are the most common cause of unwanted dark spots.
  • Mix only what you will use. Once dye is near soda ash its working life is short. Mix fresh when you sit down to work.
  • Wear a dust mask while measuring. Airborne dye powder is the one real inhalation hazard in this craft. Once dissolved, it is harmless to breathe.

Every fold, recipe and fix in this article comes from Art of Tie-Dye, Mike Fowler's complete guide to folding, tying and dyeing.

Comments